2000-2006 Mercedes-Benz CL500 4 Wheel Hydraulic Suspension Conversion Kit With Light Fix and Camber Bolts (MB14FMCK)
2000-2006 Mercedes-Benz CL500 4 Wheel Hydraulic Suspension Conversion Kit With Light Fix and Camber Bolts (MB14FMCK) is backordered and will ship as soon as it is back in stock.
2000-2006 Mercedes-Benz CL500 4 Wheel Hydraulic Suspension Conversi...
Need assistance buying the right part?
Speak to an expert now: (844) 643-0899
Monday - Friday:8 AM - 9 PM
Saturday: 9 AM - 6 PM
- Description
- Why Strutmasters
- OEM Numbers
- Instruction Manual
- Fitment
- Reviews
Convert Your Air Suspension To A Coil Spring Suspension. End Your Air Suspension Problems Forever...
Strutmasters' 2000-2006 Mercedes Benz CL-500 4-Wheel Hydraulic Suspension To Coil Spring Conversion Kit is the perfect solution to your hydraulic suspension problems. Designed to be very affordable, you can convert your suspension to use standard shocks/struts and coil springs for less than the price of replacing one air strut. This kit includes a suspension light fix module to eliminate your dashboard warning light after converting and detailed instructions to ensure a smooth installation. This kit also comes with a camber bolt kit that may be needed to properly align the vehicle after the suspension conversion has been installed. Strutmasters recommends an alignment after any and all suspension repairs.Conversion Kit Features
- Saves Money
- All New Components
- Rides Great
- More Reliable Than Air Suspensions
- No Modifications Required To Install
- Easy To Install
- Premium Springs
- Light Out Module
Air Suspension Conversion Kit Includes
- 2 Fully-Assembled Front Struts
- 2 Fully-Assembled Rear Struts
- Warning Light Module
- All Necessary Hardware
- Camber Bolts
- Detailed Installation Instructions
This Conversion Kit Fits
2000 Mercedes CL-500, 2001 Mercedes CL-500, 2002 Mercedes CL-500, 2003 Mercedes CL-500, 2004 Mercedes CL-500, 2005 Mercedes CL-500, 2006 Mercedes CL-500Product Notes
- Fits The W215 Chassis
- If you do not need the camber adjustment bolts, order kit MB14FM
- If you do not need the camber bolts or the light fix module, order kit MB14F
Replaced Components
The 2000-2006 Mercedes Benz CL500 is built with the following suspension components:
2000-2006 Mercedes Benz CL500 Hydraulic Struts (x4) - a plastic and rubber bag that is fitted onto a strut that uses pressurized hydraulic fluid as a cushion instead of a metal coil spring to hold a vehicle off of the ground and off of its wheels. These struts are controlled by the suspension control module, which is also responsible for redistributing hydraulic fluid to the struts as a means of weight distribution while cornering. All hydraulic springs go bad at about the same rate. If one is leaking, the others will not be far behind. For proper repair, all of them need to be replaced at the same time.
2000-2006 Mercedes Benz CL500 Height Sensors (x4) - a linkage located near each wheel of a vehicle with any electronic suspension that, either mechanically or electronically, constantly measures the height of the vehicle, and reports this information back to the control module so that the computer can identify if changes in height need to be adjusted accordingly. The ride height sensor is a moving part, and like all moving parts, it will eventually wear out.
2000-2006 Mercedes Benz CL500 Hydraulic Lines- tubes that run from a hydraulic pump to the hydraulic struts, which carry pressurized hydraulic fluid to hydraulic struts in order to adjust the height of the vehicle, respectively.
2000-2006 Mercedes Benz CL500 Hydraulic Pump- if your Mercedes has hydraulic suspension instead of air suspension, then the hydraulic steering pump will also serve as the reservoir for the hydraulic fluid going into the struts.
2000-2006 Mercedes Benz CL500 Dryer- prevents moisture build-up inside of hydraulic suspension parts.
2000-2006 Mercedes Benz CL500 Suspension Control Module- a computer that is responsible for the operations of the hydraulic suspension system and maintaining the vehicle's correct ride height.
2000-2006 Mercedes Benz CL500 O-rings- Although they are the least expensive parts of the hydraulic suspension, they are responsible for maintaining the seal where all of the hydraulic lines connect. Be sure to replace the O-rings when repairing any hydraulic suspension system.
Suspension Failure Signs
Early diagnosis of a bad suspension is critical to maintaining the overall functionality of the 2000-2006 Mercedes-Benz CL500 4Wheel. Look for these classic signs that indicate the suspension is leaking or failed. The most noticeable is a sudden height variance between different sides of the CL500. This may look like one sagging end, one inflated end, a shifting lean from side to side, or a squatting down, appearance. These height imbalances will wear out the air compressor from applying too much strain. If the air compressor has already ceased working or is running too often then suspension failure will advance. At this point, a suspension warning message will illuminate on the dashboard.
OEM Replacement Cost
- + Front Hydraulic Strut Assemblies ($2,000/strut)
- + Rear Hydraulic Strut Assemblies ($1,700/strut)
- + Hydraulic Pump ($1,300)
- + Hydraulic Reservoir ($400)
- = Over $9,000 (but that doesn't include replacing electronic components that are known to fail such as the height sensors).
Aftermarket Replacement Cost
New aftermarket replacement struts are not available for this model.
